How to Avoid the Most Common Roofing Mistakes

Roofs have many uses. However, you may not understand the value of a defective roof until you have to live with it. A perfect system made from high-quality materials and installed correctly will protect your home for many years to come.

Lone star roofing is Texas’ premier roofing company. We know you are making an investment when you install a new roof. To help you get the most out of this investment, we list four common roofing mistakes to avoid and how to avoid them.

Misaligned shingles

It is important to make sure that your roof is properly aligned and that your shingles are not misplaced. This can result in water damage, increased wear, and leaks. These problems can affect the aesthetics and safety of your home.

The best way to prevent misalignment is to follow the manufacturer’s instructions. Most dimensional shingle manufacturers have specific areas for nail placement. For example, in most instances, three-tab shingles require four nails, while laminated shingles may only need one or two.

Flashing around objects

The right flashing can keep your home dry and prevent hefty repair bills. The best ones are installed by a seasoned professional. They are also an important part of the whole roofing process. In fact, they might be the only thing that keeps your shingle from sagging. It’s a good idea to have them perform a periodic roof inspection to ensure your shingles are still performing their due diligence. If they’re not, you might be stuck paying for costly repair bills all down the line.

Reusing the old flashing

Reusing the old flashing is a common roofing mistake that many roofers make. Not only is it a bad idea, it also can cause water damage to your home.

Flashing is a thin, metal sheet that is installed on a roof to prevent leaks. It’s typically used in areas where shingles or siding won’t be able to protect the area.

Flashing is a crucial component of a good roofing system. Properly installed flashing will ensure your roof stays leak free. Using an old flashing can mean the difference between a roof that lasts for years, and a roof that’s prone to leaks and water damage.

Overhanging the eaves

When roofing a home, a homeowner can avoid overhanging the eaves. The lower edge of the roof is particularly vulnerable to damage. However, with some planning, an overhang can protect the siding, exterior facade, and other areas of the dwelling.

Eaves help to direct rain and snow away from the siding and the foundation. They also shield a home from the sun’s rays. This helps keep the house’s interiors dry and cool, preventing excess heat buildup.

Leave a Reply

Your email address will not be published. Required fields are marked *